LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Luggage Room Light >> Inspection >> Luggage Room Light Switch

Luggage Room Light Switch

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between luggage room light switch terminals.
    Fig 1: Measuring Resistance Between Luggage Room Light Switch Terminals
    G05957736Courtesy of SUBARU OF AMERICA, INC.
    Switch position Terminal No. Standard
    OFF - 1 MΩ or more
    ON 1 and 2 Less than 1 Ω
    DOOR 2 and 3 Less than 1 Ω
  2. Replace the luggage room light if the inspection result is not within the standard value.