LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Recommended Materials >> Recommended Materials >> Seal Material

Seal Material

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Use the seal material shown in the table below, or equivalent.

Seal material Application point Recommended materials Item number Alternative
Seal material
  • AT converter case
  • MT transmission case
  • MT extension case
THREE BOND 1215 004403007 DOW CORNING No. 7038
Transmission oil pan (AT model) THREE BOND 1217B K0877YA020 -
  • Rear differential
  • Oil pressure switch
  • PCV valve (non-turbo model)
THREE BOND 1324 004403042 -
  • Rear differential
  • Service hole plug
  • PCV nipple (turbo model)
THREE BOND 1105 004403010 DOW CORNING No. 7038
Steering adjusting screw THREE BOND 1102 004403006 THREE BOND 1215
  • Front sealing cover
  • Rear sealing cover
3M Butyl Rubber 8626 - -
  • Engine oil pan
  • Separator cover
  • Camshaft cap
  • Cylinder block
  • Oil pump (turbo model)
  • Rocker cover
  • Chain cover (non-turbo model)
  • Oil pan upper (non-turbo model)
  • Cylinder head (non-turbo model)
  • Camshaft carrier (non-turbo model)
  • Camshaft bearing cap (non-turbo model)
THREE BOND 1217G K0877Y0100 -
Rear differential (side retainer bolt) THREE BOND 1110B K0879Y0020 -