LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Window Washer

Window Washer

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check that the window washer system injects washer fluid to the specified area of the windshield and rear window glass shown in the figure.

Front injection position: 

A: 250 mm (9.84 in) 

B: 279 mm (10.99 in) 

Fig 1: Identifying Window Washer Front Injection Position
G08570010Courtesy of SUBARU OF AMERICA, INC.

Rear injection position: 

A: 72° 

B: 45 mm (1.8 in) 

C: 36 mm (1.4 in) 

Fig 2: Identifying Window Washer Rear Injection Position
G05957799Courtesy of SUBARU OF AMERICA, INC.