LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> TPMS (U.S. Models)

TPMS (U.S. Models)

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON, and check TPMS warning light for normal operation.
    • Normal operation (IG ON (Light check))
      Fig 1: TPMS Warning Light Blink Pattern
      G05659276Courtesy of SUBARU OF AMERICA, INC.
  2. If the TPMS warning light display does not operate normally, check and repair the system. < Refer to PROCEDURE , Basic Diagnostic Procedure. >