Pre-Delivery Inspection (PDI) Procedure: Seat

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check that each seat provides full functionality in sliding and reclining. Check all of the functions of the rear seat.
Check the passenger's seat occupant detection system.
1. Empty the passenger's seat and turn the ignition switch to ON.
2. Check the ON and OFF of passenger's airbag indicator light come on simultaneously for about 6 seconds and go off for 2 seconds, and then only OFF illuminates again.
  
  Fig 1: Identifying Airbag On/Off Indicator Light
  Courtesy of SUBARU OF AMERICA, INC.
3. Have a person with weight of approx. 70 kg (155 lb) sit down in the passenger's seat, and check if the passenger's airbag indicator light lights after about 4 seconds.
4. Empty the passenger's seat and check if the OFF of passenger's airbag indicator light comes on in about 2 seconds.