Seat Belt

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Pull out the seat belt and then release it. Check that the belt retracts smoothly.
Check seat belt warning system
1. Turn the ignition switch to ON without fastening driver's and passenger's seat belts.
2. Check if the seat belt warning lights of driver's and passenger's side blink for about six seconds and the buzzer beeps intermittently.
3. Then, check that the seat belt warning light comes on and blinks in approximately 15 seconds cycles. (If the passengers seat is empty, seat belt warning light for passengers side does not operate.)