LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Immobilizer System

Immobilizer System

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
NOTE: If malfunctions occur, refer to "IMMOBILIZER (DIAGNOSIS)". < Refer to BASIC DIAGNOSTIC PROCEDURE . >