LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Door Lock/Unlock And Open/Close Operations

Door Lock/Unlock And Open/Close Operations

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the key, lock and unlock the door several times to check for normal operation. Open and close the door several times for smooth movement.
    Fig 1: Checking Doors For Normal Operation
    G08569959Courtesy of SUBARU OF AMERICA, INC.
  2. Close the door of driver seat completely, and place the door lock knob (A) to the lock position. Then pull the inner remote (B) to ensure that doors will not open.

    For other doors, place the door lock knob (A) to lock position and then pull the inner remote (B) to ensure that doors will not open.

    Fig 2: Identifying Door Lock Knob And Inner Remote
    G08569960Courtesy of SUBARU OF AMERICA, INC.
  3. Press the driver's power door lock switch to the lock side. Check that all doors (including the rear gate) lock.
    Fig 3: Pressing Power Door Lock Switch
    G07664505Courtesy of SUBARU OF AMERICA, INC.
  4. Press the driver's power door lock switch to the unlock side. Check that all doors (including the rear gate) unlock.
    Fig 4: Pressing Driver's Side Power Door Lock Switch To Unlock Side
    G07664506Courtesy of SUBARU OF AMERICA, INC.
  5. Check that the passenger's power door lock switch locks and unlocks normally in the same manner.
    Fig 5: Locating Passenger Power Door Lock Switch
    G07664507Courtesy of SUBARU OF AMERICA, INC.