LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Periodic Maintenance Services >> Timing Belt >> Turbo Model (Other Inspections)

Turbo Model (Other Inspections)

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt cover (LH).
  2. While cranking engine at least four rotations, check the timing belt back surface for cracks or damage. Replace any faulty timing belt with a new part as needed.
  3. If the surface of timing belt (surface indicated by the arrow in the figure) is worn abnormally (scuffing and coming out of core) or damaged, inspect the idlers, tensioner, water pump pulley and cam sprocket and check the idler alignment for squareness. Replace any worn timing belt with a new part.
    Fig 1: Locating Surface Of Timing Belt
    G05332627Courtesy of SUBARU OF AMERICA, INC.
  4. Install the timing belt cover (LH).
scientia non olet · About LEMON Manuals