LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Periodic Maintenance Services >> Suspension >> Wheel Arch Height

Wheel Arch Height

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unload the cargoes and set the vehicle in curb weight (empty) condition.
  2. Check the wheel arch height of the front and rear suspensions to ensure that they are within tolerance. < Refer to WHEEL ALIGNMENT . >
  3. When the wheel arch height is out of the tolerance value, visually inspect the following components and replace deformed parts.
    • Suspension components [Front strut assembly and rear shock absorber assembly]
    • Parts connecting suspension and body
  4. When no components are deformed, adjust the wheel arch height by replacing the suspension for which the wheel arch height is not within tolerance. < Refer to WHEEL ALIGNMENT . >
scientia non olet · About LEMON Manuals