LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (General Information) >> Periodic Maintenance Services >> Suspension >> Wheel Alignment Of Front Suspension

Wheel Alignment Of Front Suspension

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the alignment of front suspension to make sure the following items are within tolerance.
    • Toe-in
    • Camber
    • Caster (Referential Value)
    • Steering angle

    < Refer to WHEEL ALIGNMENT . >

  2. When the caster angle does not conform to the reference value obviously, visually inspect the following components and replace deformed parts.
    • Suspension components [Strut assembly, crossmember, front arm, etc.]
    • Parts connecting suspension and body
  3. When the toe-in and camber are outside of the tolerance value, adjust each one so that they conform to the specified value. < Refer to WHEEL ALIGNMENT . >
  4. When the rotating angles of the right and left tires are not within tolerance, adjust them to standard.
scientia non olet · About LEMON Manuals