LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Seat System - Seats) >> Seat Heater System >> Inspection >> Seat Heater Switch

Seat Heater Switch

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the continuity between the seat heater switch terminals.
    Fig 1: Inspecting Continuity Between Seat Heater Switch Terminals
    G08566554Courtesy of SUBARU OF AMERICA, INC.

    Connector & terminal 

    HI 

    No. 7 - No. 2: 

    No. 7 - No. 4: 

    No. 7 - No. 8: 

    LOW 

    No. 7 - No. 1: 

    No. 7 - No. 2: 

    No. 7 - No. 3: 

  2. If no continuity exists, replace the seat heater switch with a new part.