B: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install each part in the reverse order of removal.
- Securely attach the bumper tabs (A) to the plastic bracket (B).
Tightening torque:
Refer to "COMPONENT" of "General Description". < Refer to FRONT BUMPER , COMPONENT, General Description. >
- Adjust the headlight beam and fog light beam.
- Adjust the headlight beam. < Refer to HEADLIGHT BEAM ADJUSTMENT , ADJUSTMENT, Headlight Assembly. >
- Adjust the fog light beam. (Model with fog light) < Refer to FOG LIGHT AIMING , ADJUSTMENT, Front Fog Light Assembly. >