LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Exterior Trim & Interior Trim) >> 29. Heat Shield Cover >> A: Removal >> 3. Rear Heat Shield Cover

3. Rear Heat Shield Cover

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear exhaust pipe and muffler.
  2. Remove the bolts, and remove the rear heat shield cover.
    Fig 1: Locating Rear Heat Shield Cover Bolts
    G05663873Courtesy of SUBARU OF AMERICA, INC.