LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Exterior Trim & Interior Trim) >> 25. Roof Trim >> B: Installation

B: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the roof cord and feeder cord along the mark-off line of the roof trim.

    Tape: 

    Item number: 86359SC000/TAPE 

    NOTE: Use the tape (service parts) by cutting into 80 mm x 50 mm (3.2 in x 2.0 in).
    Fig 1: Applying Roof Cord And Feeder Cord Along Mark-Off Line Of Roof Trim (1 Of 2)
    G07666711Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Applying Roof Cord And Feeder Cord Along Mark-Off Line Of Roof Trim (2 Of 2)
    G08566778Courtesy of SUBARU OF AMERICA, INC.
  2. Install each part in the reverse order of removal.