LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Exterior Trim & Interior Trim) >> 19. Instrument Panel Assembly >> C: Disassembly

C: Disassembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the combination meter assembly. < Refer to REMOVAL , Combination Meter. >
  2. Remove the audio. < Refer to REMOVAL , Audio. >
  3. Remove the GPS antenna. < Refer to REMOVAL , GPS Antenna. >
  4. Remove the heater vent duct. < Refer to REMOVAL , Heater Vent Duct. >
  5. Remove the bolts securing the passenger's side airbag module to the steering support beam.
    Fig 1: Locating Bolts Securing Passenger's Side Airbag Module To Steering Support Beam
    G05022986Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the claw, and remove the passenger's airbag module.
    Fig 2: Identifying Passenger's Airbag Module
    G05663825Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals