LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (HVAC System (Heater, Ventilator And A/C)) >> In-Vehicle Sensor (Auto A/C Model) >> Removal

In-Vehicle Sensor (Auto A/C Model): Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. < Refer to REMOVAL , Instrument Panel Lower Cover. >
  3. Disconnect the in-vehicle sensor connector and aspirator hose.
  4. Remove the screw and remove the in-vehicle sensor from the instrument panel.
    Fig 1: Locating In-Vehicle Sensor Screw
    G05663201Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals