LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (HVAC System (Heater, Ventilator And A/C)) >> Hose and Pipe >> Removal

Hose and Pipe: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When disconnecting hoses, do not apply excessive force.
  • Seal the disconnected hose with a plug or vinyl tape to prevent foreign matter from entering.
  1. Disconnect the ground cable from battery.
  2. Using the refrigerant recovery system, drain the refrigerant. < Refer to PROCEDURE , Refrigerant Recovery Procedure. >
  3. Remove the bolts and detach the hoses and pipes.
scientia non olet · About LEMON Manuals