A/C System
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specifications | ||
|---|---|---|---|
| Type of air conditioner | Reheat air-mix type | ||
| Cooling capacity | 5.0 kW [at 480 m3 (16, 954 cu ft)/h] (4, 299 kcal/h, 17, 059 BTU/h) | ||
| Refrigerant | HFC-134a (CH2FCF3) [0.5±0.05 kg (1.1±0.11 lb)] | ||
| Compressor | Type | Rotary fixed capacity (DVK-10R) | |
| Discharge | 105 cc (6.41 cu in)/rev | ||
| Max. permissible speed | 7, 700 rpm | ||
| Magnet clutch | Type | Dry, single-disc type | |
| Power consumption | Non-turbo model: 41.2 W Turbo model: 38.8 W |
||
| Type of belt | Non-turbo model: V-belt 6 PK Turbo model: V-belt 4 PK |
||
| Pulley dia. (effective dia.) | Non-turbo model: 110 mm (4.33 in) Turbo model: 100 mm (3.94 in) |
||
| Pulley ratio | Non-turbo model: 1.3 Turbo model: 1.33 |
||
| Condenser | Type | Sub cool type | |
| Core face area | 0.188 m2 (2.002 sq ft) | ||
| Core thickness | 16 mm (0.63 in) | ||
| Radiation area | 4.5 m2 (48.44 sq ft) | ||
| Expansion valve | Type | Block | |
| Evaporator | Type | Dual-tank | |
| Dimensions (W x H x T) | 290.1 x 172 x 39 mm (11.42 x 6.77 x 1.54 in) |
||
| Blower fan | Fan type | Sirocco fan | |
| Outer diameter x width | 150 x 75 mm (5.91 x 2.95 in) | ||
| Power consumption | 260 W | ||
| Condenser fan (Sub fan) | Motor type | Magnet | |
| Power consumption | Non-turbo model: 90 W Turbo model: 120 W |
||
| Fan outer diameter | Non-turbo model: 300 mm (11.8 in) Turbo model: 318.5 mm (12.5 in) |
||
| Radiator fan (Main fan) | Motor type | Magnet | |
| Power consumption | Non-turbo model: 90 W Turbo model: 120 W |
||
| Fan outer diameter | Non-turbo model: 300 mm (11.8 in) Turbo model: 318.5 mm (12.5 in) |
||
| Idle speed | MPFI model | No load | Non-turbo MT model: 650±100 rpm Non-turbo AT model: 675±100 rpm Turbo model: 700±100 rpm |
| A/C ON | Non-turbo model: 850±100 rpm Turbo model: 825±100 rpm |
||
| Triple switch (Pressure switch) | Low-pressure switch operating pressure | ON → OFF | 196±25 kPa (2.0±0.25 kgf/cm2 , 28.4±3.6 psi) |
| OFF → ON | 225±30 kPa (2.30±0.31 kgf/cm2 , 32.6±4.3 psi) |
||
| High-pressure switch operating pressure | ON → OFF | 2, 940±200 kPa (29.98±2.04 kgf/cm2 , 426.3±29 psi) |
|
| OFF → ON | 2, 350±200 kPa (24.00±2.04 kgf/cm2 , 340.7±29.0 psi) |
||
| Middle-pressure switch operating pressure | ON → OFF | 1, 470±120 kPa (14.99±1.22 kgf/cm2 , 213.15±17.4 psi) |
|
| OFF → ON | 1, 770±100 kPa (18.05±1.02 kgf/cm2 , 256.65±14.5 psi) |
||
| Thermo-control amplifier working temperature | |||