Unit Inspection
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Preparation tool: Circuit tester
- Check the resistance between evaporator sensor terminals.
Terminal No. Inspection conditions Standard 1 - 2 -20°C 15.37 - 16.62 kΩ -15°C 12.09 - 12.87 kΩ -10°C 9.576 - 10.05 kΩ -5°C 7.636 - 7.899 kΩ 0°C 6.132 - 6.256 kΩ 5°C 4.891 - 5.057 kΩ 10°C 3.928 - 4.113 kΩ 15°C 3.174 - 3.366 kΩ 20°C 2.581 - 2.77 kΩ 25°C 2.111 - 2.292 kΩ 30°C 1.737 - 1.907 kΩ 35°C 1.437 - 1.595 kΩ 40°C 1.195 - 1.34 kΩ - Replace the evaporator sensor if the inspection result is not within the standard value.