LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (HVAC System (Heater, Ventilator And A/C)) >> Control Unit (Manual A/C Model) >> Removal

Control Unit (Manual A/C Model): Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the ornament panel. < Refer to ORNAMENT PANEL , REMOVAL, Center Console. >
  3. Remove the knee guard panel.
  4. Remove the control wires from both sides of the heater and cooling unit.
    Fig 1: Identifying Control Cables
    G05663814Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the screws and claws, and remove the control module from the ornament panel RH.
    Fig 2: Locating Control Module Mounting Screws And Claws (Manual A/C Model)
    G05663179Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals