Compressor Oil: Procedure
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before making repairs, perform the oil return operation to return the compressor oil in circulation with the refrigerant to the compressor.
- Increase the engine to 1, 500 rpm.
- Turn the A/C switch to ON.
- Turn the temperature control dial to MAX COOL position.
- Turn the FRESH/RECIRC switch to RECIRC position.
- Turn the fan speed control dial or switch to HI (MAX) position.
- Leave in this condition for 10 minutes.