LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (HVAC System (Heater, Ventilator And A/C)) >> Ambient Sensor (Auto A/C Model) >> Removal

Ambient Sensor (Auto A/C Model): Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Disconnect the ambient sensor connector.
  3. Remove the ambient sensor from the radiator lower panel.
    Fig 1: Identifying Ambient Sensor Connector
    G05957449Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals