LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Axle Shafts, Propeller Shaft & Hubs) >> Propeller Shaft >> Inspection >> Joints And Connectors

Joints And Connectors

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center exhaust pipe.
  2. Remove the heat shield cover.
  3. Check for any looseness of the yoke flange mounting bolts which connect to the rear differential and center bearing bracket mounting bolts.
scientia non olet · About LEMON Manuals