Rear Housing Bushing

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear housing. < Refer to REMOVAL , Rear Axle. >
Using the ST and a hydraulic press, push out the bushing.
ST1 20099FG000 BUSHING REMOVER

ST2 20099PA010 INSTALLER & REMOVER (BASE)

Fig 1: Pushing Out Rear Housing Bushing Using Special Tools
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Pressing Rear Housing Bushing
Courtesy of SUBARU OF AMERICA, INC.