Parking Brake Lever: Inspection
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Operate the parking brake lever 3 to 4 times and fully return the lever.
- While slowly pulling the parking brake lever upward, count the notches.
Lever stroke:
7 to 8 notches when pulled with a force of 200 N (20.4 kgf, 45 lbf)
- Adjust the parking brake if the inspection result is not within the standard value. < Refer to ADJUSTMENT , Parking Brake Assembly (Rear Disc Brake). >