Parking Brake Assembly (Rear Disc Brake): Inspection

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Measure the inner diameter of the disc rotor. If scoring or worn is found on the disc, replace the disc rotor.
Disc rotor inner diameter:

Standard

190 mm (7.48 in)

Service limit

191 mm (7.52 in)
Measure the lining thickness. If it exceeds the limit, replace the brake shoe.
Lining thickness:

Standard

2.8 mm (0.11 in)

Service limit

1.5 mm (0.059 in)

NOTE:
Replace the right and left brake shoe as a set.