Rear Brake Hose

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove union bolt and brake hose bracket bolt.

Fig 1: Identifying Brake Hose Bracket Bolt And Union Bolt
Courtesy of SUBARU OF AMERICA, INC.
Separate the brake pipe from brake hose using a flare nut wrench.
Remove the clamp, and then remove the brake hose.

Fig 2: Identifying Brake Pipe, Brake Hose And Clamp
Courtesy of SUBARU OF AMERICA, INC.