Check Buzzer: Trouble Symptom

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Buzzer remains beeping.

Step	Check	Yes	No
1 CHECK BODY INTEGRATED UNIT. Turn the ignition switch to OFF. Connect the Subaru Select Monitor to data link connector. Turn the ignition switch to ON. Run the Subaru Select Monitor. Read the "SPORT Shift (buzzer 1)" and "SPORT Shift (buzzer 2)" data using Subaru Select Monitor.	Is "ON" displayed?	Replace the TCM. < Refer to TRANSMISSION CONTROL MODULE (TCM) . >	Go to step 2 .
2 CHECK COMBINATION METER. < Refer to INSPECTION , Combination Meter System. >	Is the buzzer OK?	Refer to "Diagnostics with Phenomenon". < Refer to DIAGNOSTICS WITH PHENOMENON . >	Replace the combination meter assembly. < Refer to COMBINATION METER . >