Clutch Pipe and Hose: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the air intake boot assembly. < Refer to REMOVAL , Air Intake Boot. >
Drain the clutch fluid. < Refer to CLUTCH FLUID . >
Disconnect the clutch pipe from the clutch hose and master cylinder.
Pull out the clamp, then disconnect the clutch hose from the bracket.

Fig 1: Identifying Clamp And Clutch Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the clutch hose from operating cylinder.
Remove the bracket.