Clutch Pedal: Assembly
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Attach the stopper and pedal pad to the clutch pedal.
- Install the clutch switch to the pedal bracket.
- Clean the pedal bushing holes of the clutch pedal and the brake pedal, apply grease, and install the pedal bushings.
- Install the clutch pedal, brake pedal and lever to the pedal bracket, and fix with a spring pin.
- Install the assist rod A, assist rod B, assist bushing and assist spring to the clutch pedal and pedal bracket.