LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Cooling System (H4DO)) >> Radiator Main Fan and Fan Motor >> Installation

Radiator Main Fan and Fan Motor: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: If the installation of the radiator main fan and fan motor is difficult, attempt installation after loosening the bolts which hold the radiator sub fan shroud to the radiator.

Tightening torque: 

7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

scientia non olet · About LEMON Manuals