Camshaft Position Sensor LH

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting/Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the intake manifold. < Refer to REMOVAL , Intake Manifold. >
Remove the camshaft position sensor LH.

Fig 2: Locating Camshaft Position Sensor LH Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.