Tumble Generator Valve Actuator: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Connecting/Disconnecting Battery Ground Terminal
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) from tumble generator valve actuator, and remove the tumble generator valve actuator.
- LH side
  
  Fig 2: Identifying Tumble Generator Valve Actuator Connector (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 3: Identifying Tumble Generator Valve Actuator Connector (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.