Draining Of Engine Coolant

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the vehicle.
Remove the under cover.< Refer to REMOVAL , Front Under Cover. >
Remove the drain plug to drain engine coolant into container.
NOTE: Remove the coolant filler tank cap so that engine coolant will drain faster.

Fig 1: Locating Drain Plug
Courtesy of SUBARU OF AMERICA, INC.
Install the drain plug.
Install the under cover.< Refer to INSTALLATION , Front Under Cover. >