Automatic Belt Tension Adjuster Assembly And Belt Idler

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the belt idler (A) and (B).

Fig 1: Identifying Belt Idlers
Courtesy of SUBARU OF AMERICA, INC.
Remove the belt idler No. 2.

Fig 2: Locating Belt Idler No. 2
Courtesy of SUBARU OF AMERICA, INC.
Remove the automatic belt tension adjuster assembly.

Fig 3: Locating Automatic Belt Tension Adjuster Assembly Mounting Bolt
Courtesy of SUBARU OF AMERICA, INC.