Timing Belt Cover: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the front timing belt cover (C).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the timing belt cover LH (B).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the timing belt cover RH (A).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)

Fig 1: Identifying Front Timing Belt Cover With Mounting Fasteners
Courtesy of SUBARU OF AMERICA, INC.
Install the crank pulley. < Refer to INSTALLATION , Crank Pulley. >
Install the secondary air pump. < Refer to INSTALLATION , Secondary Air Pump. >