LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical (H4DOTC)) >> Cylinder Head >> Inspection >> Valve Spring

Valve Spring

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the valve springs for damage, free length, and tension. Replace the valve spring if it is not within the standard value presented in the table.
  2. To measure the squareness of the valve spring, stand the valve spring on a surface plate and measure its deflection at the top of valve spring using a right angle gauge.
    Free length mm (in) 47.32 (1.863)
    Tension/spring height
    N (kgf, lb)/mm (in)
    Set 205 - 235 (20.9 - 24.0, 46.1 - 52.8)/36.0 (1.417)
    Lift 426 - 490 (43.4 - 50.0, 95.8 - 110)/26.50 (1.041)
    Squareness 2.5°, 2.1 mm (0.083 in) or less
    Fig 1: Measuring Squareness Of Valve Spring
    G04997718Courtesy of SUBARU OF AMERICA, INC.