LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H4DO) >> General Description >> Preparation Tool >> Special Tool

Special Tool

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G07669205
 0920287002000 REMOVER AND REPLACER Used for removing and installing valve spring.
G05002437
 398437700 OIL SEAL INSTALLER Used for installing the front oil seal of engine.
G04997553
 498277200 STOPPER SET Used for preventing the torque converter from falling when removing and installing the engine.
G04997554
 498457000 ENGINE STAND ADAPTER RH
  • Used for disassembling and assembling engine.
  • Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
G04997555
 498457100 ENGINE STAND ADAPTER LH
  • Used for disassembling and assembling engine.
  • Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
G05018648
 499765700 VALVE GUIDE REMOVER AND INSTALLER Used for removing and installing valve guide.
G05018649
 499765900 VALVE GUIDE REAMER Used for reaming valve guides.
G04997575
 499817100 ENGINE STAND
  • Used for disassembling and assembling engine.
  • Used together with ADAPTER (18362AA020), ENGINE STAND ADAPTER RH (498457000) and LH (498457100).
G05018651
 18252AA000 CRANKSHAFT SOCKET Used for rotating crankshaft.
G07669214
 18261AA010 VALVE OIL SEAL GUIDE Used for press-fitting of intake valve guide stem seals and exhaust valve guide stem seals.
G08316787
 18270AA020 SOCKET Used for removing and installing connecting rod.
G05667733
 18334AA000 PULLEY WRENCH PIN SET
  • Used for removing and installing the crank pulley.
  • Used together with PULLEY WRENCH (18355AA000).
G07669216
 18334AA020 PULLEY WRENCH PIN SET
  • Used for removing and installing exhaust cam sprocket.
  • Used together with PULLEY WRENCH (18355AA000).
G07669217
 18334AA030 PULLEY WRENCH PIN SET
  • Used for removing and installing water pump pulley and intake cam sprocket.
  • Used together with PULLEY WRENCH (18355AA000).
G05018640
 18350AA000 CONNECTING ROD BUSHING REMOVER AND INSTALLER Used for removing and installing the connecting rod bushing at connecting rod small end.
G05667732
 18355AA000 PULLEY WRENCH
  • Used for installing and removing the water pump pulley.
  • Used for removing and installing the crank pulley.
  • Used for removing and installing intake cam sprocket and exhaust cam sprocket LH.
  • Used together with PULLEY WRENCH PIN SET (18334AA000), PULLEY WRENCH PIN SET (18334AA020) or PULLEY WRENCH PIN SET (18334AA030).
G07669221
 18362AA020 ADAPTER
  • Used for disassembling and assembling engine.
  • Used together with STAND (499817100), ENGINE STAND ADAPTER RH (498457000) and LH (498457100).
  • Bolt used: M10 x 50 (SUBARU genuine Part No. 010410500)
G05031183
 18471AA000 FUEL PIPE ADAPTER Used for inspecting the fuel pressure.
G07669223
 18657AA030 OIL SEAL INSTALLER
  • Used for installing the rear oil seal of engine.
  • Used together with OIL SEAL GUIDE (18671AA020).
G07669224
 18671AA020 OIL SEAL GUIDE
  • Used for installing the rear oil seal of engine.
  • Used together with OIL SEAL INSTALLER (18657AA030).
G05022169
 18854AA000 ANGLE GAUGE Used for angle tightening.
G04997325
 42099AE000 QUICK CONNECTOR RELEASE Used for removing the quick connector.
G05031184
 42075AG690 FUEL HOSE Used for inspecting the fuel pressure.
NOTE: This is the SUBARU genuine part.
G07669228
 18270KA010 SOCKET Used for installing and removing intake cam sprocket and exhaust cam sprocket.
G07910019
 1B022XU0 SUBARU SELECT MONITOR III KIT Used for various inspections.
scientia non olet · About LEMON Manuals