LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (H4DO) >> Thermostat >> Removal

Engine Cooling System (H4DO): Thermostat: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Lift up the vehicle.
  3. Remove the under cover. Refer to REMOVAL .
  4. Drain engine coolant. Refer to DRAINING OF ENGINE COOLANT .
  5. Remove the front exhaust pipe. Refer to REMOVAL .
  6. Disconnect the radiator outlet hose from thermostat cover.
    Fig 2: Locating Radiator Outlet Hose From Thermostat Cover
    G08580465Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the thermostat cover, and then remove the gasket and thermostat.
    Fig 3: Identifying Thermostat Cover, Gasket And Thermostat
    G08580466Courtesy of SUBARU OF AMERICA, INC.