LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (H4DO) >> Reservoir Tank >> Removal

Reservoir Tank: Removal

  1. Disconnect the over flow hose (A) connected to the radiator filler neck from the reservoir tank.
  2. Pull out the reservoir tank to the arrow direction while pushing the claw (B).
    Fig 1: Pulling Reservoir Tank
    G08580500Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals