LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle Shafts, Propeller Shaft & Hubs >> General Description >> Preparation Tool >> Special Tool

Special Tool

ILLUSTRATION Part No. DESCRIPTION REMARKS
G05956940
 28099AC000 BOOT BAND PLIER Used for tightening the boot band. (Front boot band)
G05032569
 925091000 BAND TIGHTENING TOOL Used for tightening the boot band.
(A) Jig for the band
(B) Ratchet wrench
G05002460
 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05032570
 926470000 AXLE SHAFT PULLER
  • Used for removing the axle shaft.
  • Used together with AXLE SHAFT PULLER PLATE (28099PA110).
G05032573
 28099PA110 AXLE SHAFT PULLER PLATE Exchange with the plate of the AXLE SHAFT PULLER (926470000) to use.
G05343296
 927080000 HUB STAND Used for assembling hub bolt in hub.
G05032576
 28399AG000 HUB STAND Used for extracting hub bolt.
G05032383
 28099PA090 OIL SEAL PROTECTOR
  • Used for installing the rear drive shaft to the rear differential.
  • For protecting the oil seal.
G05002461
 28399SA010 OIL SEAL PROTECTOR
  • Used for installing front drive shaft into front differential.
  • For protecting the oil seal.
scientia non olet · About LEMON Manuals