|
|
398477701 |
HANDLE |
- Used for installing the rear bearing race.
- Used for installing the front bearing race. (T-type and VA1-type)
|
|
|
398477702 |
DRIFT |
- Used for installing the front bearing race. (T-type)
- Used for installing the rear bearing race. (VA1-type)
- Used for installing side bearing race. (VA1-type)
|
|
|
398217700 |
ATTACHMENT SET |
Stand for rear differential carrier disassembly and assembly. |
|
|
498447120 |
INSTALLER |
Used for installing the front oil seal. |
|
|
498427200 |
FLANGE WRENCH |
Used for stopping rotation of companion flange when removing and tightening self-lock nut. |
|
|
398467700 |
DRIFT |
Used for removing drive pinion shaft, pilot bearing and front bearing cone. (T-type and VA1-type) |
|
|
399780104 |
WEIGHT |
- Used for installing the front bearing cone and the companion flange.
- Used for installing the pilot bearing. (T-type and VA1-type)
|
|
|
899580100 |
INSTALLER |
Used for installing the front bearing cone and the pilot bearing. (T-type and VA1-type) |
|
|
899904100 |
STRAIGHT PIN REMOVER |
- Used for removing and installing the pinion mate shaft lock pin. (T-type)
- Used for removing and installing the pinion mate shaft spring pin. (VA-type)
|
|
|
498247001 |
MAGNET BASE |
- Used for measuring backlash between side gear and pinion, and hypoid gear.
- Used together with DIAL GAUGE (498247100).
|
|
|
498247100 |
DIAL GAUGE |
- Used for measuring backlash between side gear and pinion, and hypoid gear.
- Used together with MAGNET BASE (498247001).
|
|
|
398507704 |
BLOCK |
Used for adjusting pinion height and preload. (T-type and VA1-type) |
|
|
398177700 |
INSTALLER |
Used for installing the rear bearing cone. (T-type and VA2-type) |
|
|
398457700 |
ATTACHMENT |
Used for removing the side retainer. (T-type) |
|
|
398477703 |
DRIFT 2 |
Used for installing the rear bearing race. (T-type and VA2-type) |
|
|
398437700 |
DRIFT |
Used for installing the side oil seal. (T-type and VA2-type) |
|
|
398507702 |
DUMMY SHAFT |
Used for adjusting pinion height and preload. (T-type) |
|
|
398507703 |
DUMMY COLLAR |
Used for adjusting pinion height and preload. (T-type) |
|
|
398517700 |
REPLACER |
Used for removing rear bearing cone. (T-type and VA2-type) |
|
|
398487700 |
DRIFT |
Used for installing side bearing cone. (T-type and VA2-type) |
|
|
398507701 |
DIFFERENTIAL CARRIER GAUGE |
Used for adjusting pinion height. (T-type) |
|
|
398527700 |
PULLER ASSY |
- Used for removing front oil seal.
- Used for removing the side bearing race. (T-type)
|
|
|
398417700 |
DRIFT |
Used for installing side bearing race. (T-type and VA2-type) |
|
|
28099PA090 |
OIL SEAL PROTECTOR |
Used for installing the rear drive shaft to the rear differential. (For oil seal protection) |
|
|
28099PA100 |
DRIVE SHAFT REMOVER |
Used for removing the rear drive shaft from rear differential. (T-type) |
|
|
399703600 |
PULLER ASSY |
Used for removing companion flange. |
|
|
899874100 |
INSTALLER |
Used for installing the companion flange. |
|
|
498077000 |
REMOVER |
Used for removing the side bearing cone. (VA2-type) |
|
|
899864100 |
REMOVER |
Used for removing the side bearing cone. (VA2-type) |
|
|
499277200 |
INSTALLER |
Used for installing the front bearing race and front oil seal. (VA2-type) |
|
|
18758AA000 |
PULLER |
Used for removing the side bearing race. (VA2-type) |
|
|
18759AA000 |
PULLER ASSY |
Used for removing the side bearing cone. (T-type) |
|
|
18678AA000 |
DUMMY SHAFT |
Used for adjusting pinion height and preload. (VA2-type) |
|
|
18831AA010 |
DIFFERENTIAL CARRIER GAUGE |
Used for adjusting pinion height. (VA2-type) |
|
|
18630AA010 |
WRENCH COMPL RETAINER |
- Used for removing and installing the side retainer. (VA1-type and VA2-type)
- WRENCH ASSY (499787000) can also be used.
|
|
|
498175500 |
INSTALLER |
Used for installing the rear bearing cone. (VA1-type) |
|
|
498447100 |
INSTALLER |
Used for installing the side oil seal. (VA1-type) |
|
|
399520105 |
SEAT |
- Used for removing the side bearing cone. (VA1-type and VA2-type)
- Used together with PULLER SET (899524100). (VA1-type)
- Used together with REMOVER (899864100). (VA2-type)
|
|
|
899524100 |
PULLER SET |
- Used for removing the side bearing cone. (VA1-type)
- Used together with SEAT (399520105).
- Puller
- Cap
|
|
|
498485400 |
DRIFT |
Used for installing side bearing cone. (VA1-type) |
|
|
498505501 |
DIFFERENTIAL CARRIER GAUGE |
Used for adjusting pinion height. (VA1-type) |
|
|
498447110 |
DRIFT |
Used for installing the front bearing race. (VA1-type) |
|
|
498447150 |
DUMMY SHAFT |
Used for adjusting pinion height and preload. (VA1-type) |
|
|
498515500 |
REPLACER |
Used for removing rear bearing cone. (VA1-type) |
|
|
499705404 |
SEAT |
- Used for removing the side bearing race. (VA1-type)
- Used together with PULLER ASSY (499705401).
|
|
|
499705401 |
PULLER ASSY |
- Used for removing the side bearing race. (VA1-type)
- Used together with SEAT (499705404).
|
|
|
18270KA020 |
SOCKET (E20) |
Used for removing and installing the hypoid driven gear. (VA1-type and VA2-type) |
|
|
18854AA000 |
ANGLE GAUGE |
Used for installing the hypoid driven gear. (VA1-type and VA2-type) |
|
|
41399FG001 |
SPECIAL TOOL ASSY |
- Used for removing and installing the rear differential mount bushing.
- Use (1), (3), (5), (6), (7), (8) and (9) for removal.
- Use (2), (4), (5), (6), (7), (8) and (9) for installation.
- SPECIAL TOOL A (41399FG010)
- SPECIAL TOOL B (41399FG020)
- SPECIAL TOOL C (41399FG031)
- SPECIAL TOOL D (41399FG041)
- SPECIAL TOOL SLEEVE (41399FG050)
- SPECIAL TOOL RING (41399FG061)
- SPECIAL TOOL NUT (41399FG070)
- SPECIAL TOOL BEARING (41399FG080)
- SPECIAL TOOL SHAFT (41399FG091)
|
|
|
41399FG010 |
SPECIAL TOOL A |
- Used for removing the rear differential mount bushing.
- For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG020 |
SPECIAL TOOL B |
- Used for installing the rear differential mount bushing.
- For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG031 |
SPECIAL TOOL C |
- Used for removing the rear differential mount bushing.
- For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG041 |
SPECIAL TOOL D |
- Used for installing the rear differential mount bushing.
- For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG050 |
SPECIAL TOOL SLEEVE |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG061 |
SPECIAL TOOL RING |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG070 |
SPECIAL TOOL NUT |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG080 |
SPECIAL TOOL BEARING |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399FG091 |
SPECIAL TOOL SHAFT |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
|
|
41399YC000 |
SOCKET WRENCH (17) |
Used for tightening the self-locking nut. (Except for OUTBACK) |
|
|
1B022XU0 |
SUBARU SELECT MONITOR III KIT |
Used for troubleshooting the electrical system. |