LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake System (Diagnostics) >> Inspection Mode >> Procedure

Inspection Mode: Procedure

  1. Start the engine, and operate and release the electronic parking brake a few times with the vehicle at a standstill.
  2. Check if the warning light illuminates or blinks, or DTC is displayed.
    NOTE: If the DTC is displayed, perform the diagnosis using "Diagnostic Procedure with Diagnostic Trouble Code (DTC)". < Refer to DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC) . >
  3. Drive the vehicle at least 10 minutes, and operate and release the parking brake a few times.
    CAUTION: Do not drive when the warning light illuminates or blinks.
scientia non olet · About LEMON Manuals