LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake System (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC C0266 Cruise Controller Communication System >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK STEREO CAMERA. 
  1. Start the engine.
  2. Check DTC of the stereo camera. < Refer to OPERATION , Read Diagnostic Trouble Code (DTC). >
 Is a DTC of the stereo camera displayed? Perform the diagnosis according to DTC of the stereo camera. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > Go to step 2  .
2 CHECK LAN SYSTEM. 
Check the DTC in LAN system. < Refer to OPERATION , Read Diagnostic Trouble Code (DTC). >		 Is DTC of LAN system displayed? Perform the diagnosis according to DTC for LAN system. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > Go to step 3  .
3 CHECK ELECTRONIC PARKING BRAKE CM. 
  1. Connect all connectors.
  2. Clear the memory. < Refer to CLEAR MEMORY MODE . >
  3. Perform the Inspection Mode. < Refer to INSPECTION MODE . >
  4. Read the DTC.
 Is the same DTC displayed? Replace the electronic parking brake CM. < Refer to PARKING BRAKE ACTUATOR . > Go to step 4  .
4 CHECK OTHER DTC DETECTION.  Is any other DTC displayed? Perform the diagnosis according to DTC. It results from a temporary noise interference.
scientia non olet · About LEMON Manuals