LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake System (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC C0265 Body Integrated Module Communication Circuit >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK BODY INTEGRATED UNIT. 
  1. Start the engine.
  2. Check DTC of body integrated unit. < Refer to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
Is DTC of the body integrated unit displayed? Perform the diagnosis according to DTC for the body integrated unit. < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > Go to step .
2 CHECK ELECTRONIC PARKING BRAKE CM. 
  1. Connect all connectors.
  2. Clear the memory. < Refer to CLEAR MEMORY MODE . >
  3. Perform the Inspection Mode. < Refer to INSPECTION MODE . >
  4. Read the DTC.
Is the same DTC displayed? Replace the electronic parking brake CM. < Refer to PARKING BRAKE ACTUATOR . > Go to step .
3 CHECK OTHER DTC DETECTION.  Is any other DTC displayed? Perform the diagnosis according to DTC. It results from a temporary noise interference.