DTC C0243 Parameter Selection Error: Trouble Symptom
- Electronic parking brake warning light illuminates. (C6 model)
- Brake warning light blinks. (Models other than C6 model)
- Hill hold function and accelerator interlocking release function do not operate.
NOTE:
After performing Parameter Initialization Mode, make sure to perform the Force Sensor Calibration Mode and Clutch Sensor Calibration Mode. < Refer to
FORCE SENSOR CALIBRATION MODE , OPERATION, Subaru Select Monitor. > < Refer to
CLUTCH SENSOR CALIBRATION MODE , OPERATION, Subaru Select Monitor. >