Rear Brake Pad: Removal

Lift up the vehicle, and then remove the rear wheels.
Remove the rear brake pad.
1. Remove the bolts and remove the brake hose bracket.
2. Remove the caliper bolt, and raise and hold the caliper body.
  NOTE: Do not disconnect the brake hose from the caliper body.
  
  Fig 1: Locating Brake Hose Bracket Mounting Bolt And Caliper Bolt
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the brake pad from support.
  
  Fig 2: Removing Brake Pad From Support
  Courtesy of SUBARU OF AMERICA, INC.