LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Hose >> Removal >> Rear Brake Hose

Rear Brake Hose

  1. Remove the brake hose bracket bolt and union bolt.
    Fig 1: Locating Rear Brake Hose And Pipe Mounting Bolts
    G07915646Courtesy of SUBARU OF AMERICA, INC.
  2. Separate the brake pipe (a) using a flare nut wrench.
  3. Remove the brake hose clamp (b), and remove the rear brake hose (c).
    Fig 2: Identifying Rear Brake Pipe, Hose And Clamp
    G07915683Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals