Seat Heater Relay And Fuse

Disconnect the ground cable from battery.
Remove the instrument panel lower cover.
1. Remove the clips, and remove the instrument panel side cover LH.
  
  Fig 1: Identifying Instrument Panel Side Cover Clips (LH)
2. Remove the clips and data link connector, and remove the instrument panel lower cover under.
  
  Fig 2: Identifying Instrument Panel Lower Cover Clips
3. Remove the screws and clips and release the claws, and remove the instrument panel lower cover while disconnecting the harness connectors.
  
  Fig 3: Locating Instrument Panel Lower Cover Screws And Clips
Remove the seat heater relay and fuse.
1. Remove the joint box bolts.
2. Remove the seat heater relay
  
  Fig 4: Locating Seat Heater Relay And Fuse